Skip to main content

PlanSwift v.12 BETA Release Notes (ARCHIVE)

  • Jul 6, 2026 5:10 PM UTC
  • Nov 16, 2026 8:47 PM UTC
  • 0 replies
  • 635 views

daniel.wal

PlanSwift 12 BETA Releases

 

 

 

Concrete in Auto Takeoff, moved Takeoff BOOST tools to main tab, several bug fixes - v.12.0.14.904 (Released 11/12/2026)

Auto Takeoff can now take off concrete. Auto Takeoff finds your spread footings, linear footings, piers and slabs on grade, sizes them from the footing schedules in your plan set and gives you their volume in cubic yards or cubic meters. This update also corrects cubic-yard quantities across PlanSwift, which will read about 3% higher in existing jobs. Please read that section before you compare jobs or rerun estimates.

What's New

  • Auto Takeoff Now Includes Concrete

Open Auto Takeoff and choose the new Volume tab. Tick the concrete you want, pick your sheets and run it.

Condition

Measured as

You get

Spread Footing

Count

Width, depth, height and volume per footing

Pier

Count

Diameter (round) or width and length (rectangular), height and volume

Linear Footing

Linear

Width, depth and volume along the footing line

Slab On Grade

Area

Thickness and volume

  • Sized from your schedules. Auto Takeoff finds the sheets that hold your footing and pier schedules and reads the sizes from them. You don't need to select those sheets yourself.
  • Volume in CU YD or CU M, depending on your measurement system.
  • Drawn at true size. Footing and pier markers show their real size on the plan: round piers as circles, rectangular piers and spread footings as squares. Change a footing's size and its marker updates.
  • Results land in their own folder, Takeoff > Boost > Concrete, so they never mix with your own takeoff.
  • Missing sizes are flagged. If a size can't be read, the condition keeps a sensible default and the completion message tells you which ones to check.

PlanSwift 12 was rounding the feet-to-yards conversion, so every cubic-yard quantity came out 2.97% low. This update fixes it, so cubic-yard totals in your existing jobs will read about 3% higher. The new number is the correct one.

  • What it affects: any quantity in CU YD, including Area Cubic Yards, Linear Cubic Yards and your own types that convert to cubic yards.
  • Example: 27 cubic feet now reads exactly 1.00 CU YD, where it used to read 0.97.
  • Metric: dimensions entered in millimetres were converting to zero, so volumes built on them read 0 CU M. They now calculate correctly.
  • What to do: if you have already sent an estimate built on cubic yards from PlanSwift 12, reopen the job to see the corrected quantity before you rely on it again.

If you have edited PlanSwift's built-in unit definitions, the update replaces them with the corrected ones. Units you created yourself are not touched.

Changes/Improvments

  • The Takeoff Boost buttons now sit with the commands they work alongside.

    Where

    What you'll see

    Home > Project

    New, Open Job, then Auto Name, Auto Scale, Auto Bookmark, then Project Settings

    Home > Takeoff

    Area, Linear, Segment, Count, then Auto Takeoff, Auto Count, then Single Click and Send Data

    Tools > Takeoff Boost

    Reassign Takeoff

     

  • The Annotations button is gone. It repeated what was already in Markups: Revision Clouds, Sticky Tabs, and Rubber Stamps are all in the Markups menu, and Markups now uses the Annotations icon.

Fixes

  • Item Properties

    • Reordering properties no longer changes the item. Moving a property up or down, dragging it or pasting one could quietly detach some of the item's other properties from its template, even if you then pressed Cancel. In some cases the item's icon was lost. This no longer happens. Items already affected are not repaired automatically.
    • Dragging a property onto a formula works on long lists. The list scrolls as you drag to its top or bottom edge, and the property lands on the formula you release it on. The list keeps its place and your collapsed groups stay collapsed.
    • The formula you're dropping onto is highlighted while you drag.
    • Form view: with Show Units turned on, each unit now sits on the same line as its field.
  • Export Plugin Package

  • Next works again. It turns on as soon as you type a plugin name.
    • You can choose what to export. The content lists now show their checkboxes, and long item names are no longer cut off.
    • The "Require a license" option has been removed. Packages you export are not licence-locked. Licence-locked packages made earlier still import as before.
    • Auto Takeoff

  • Rotated pages: if you rotate a page and run Auto Takeoff again, the results now line up with the rotated drawing.

Auto Name!!! and several bug fixes - v.12.0.14.901 (Released 11/06/2026)

This Beta introduces Auto Name, a new Takeoff Boost tool. It names your plan pages, files them into discipline folders and sets their scale for you. It also corrects Auto Scale on metric drawings and fixes 13 issues reported by testers, most of them in opening, moving and importing jobs.

What's New

Auto Name reads the title block on each plan sheet and renames the page to [Sheet Number] - [Sheet Name], for example A-101 - First Floor Plan. It can also file the page into a discipline folder (Architectural, Structural, Electrical and so on) and set its scale.

When you create a job or add pages

  1. In New Job or Add Pages, choose your plans as usual.
  2. On the new Search and Takeoff Boost page, tick what you want: Auto Name pages, File pages into discipline folders and Auto Scale pages. Text Search has moved to this page too. All three boxes start ticked, and PlanSwift remembers your choices for next time.
  3. Click Finish. Once the job opens, a message tells you Auto Name is working in the background. Keep working; you'll get a notification when it's done, listing any pages it couldn't read.

To set scales without renaming or filing anything, tick Auto Scale pages on its own.

For pages already in a job

Click Auto Name in the Takeoff Boost ribbon bar, pick the pages, and run it. Large plan sets are processed in batches of 30, and the progress shows how far along it is. A small set usually takes under a minute.

What Auto Name leaves alone

  • A page you renamed yourself keeps your name. It still gets a scale if it has none.
  • A page you put in your own folder, or one that belongs to a multi-page file, stays where it is.
  • Letter- and legal-size pages are skipped.
  • A scale you already set is never replaced.

Changed your mind? A single Undo reverses the whole run: names, folders and scales.

Please check the results. Auto Name uses AI to read title blocks. It reads most sheet numbers correctly, and sheet titles somewhat less often, so look over the page names in the Pages panel after a run.

Who can use it: Auto Name is part of Takeoff Boost and is included in every PlanSwift subscription except Standard. You must be signed in. (On Standard, the options are greyed out with a note explaining why.)


Changes/Improvements

  • Auto Scale now sets the correct scale on metric sheets such as 1:100. Before this update, metric pages could get the wrong scale, so measurements on them were off. The fix covers both the Auto Scale button and Auto Name's scale option. If you used Auto Scale on metric drawings in an earlier Beta, check the scale on those pages and run Auto Scale again where needed.

Fixes

  • Opening, moving and finding jobs

    • Move To now works on the job PlanSwift reopened when it started. The job closes, moves and reopens from its new location.
    • Recent documents follows a job you moved. If a recent job can no longer be found, PlanSwift says so and removes it from the list instead of creating an empty job.
    • Open Job now warns you about a job folder that is missing its data file, naming the job and where it is, instead of silently leaving it out.
    • Open Job opens on the storage location you used last, and New Job suggests the location of the last job you created.
  • Importing

    • Opening a .swiftjob file, by double-clicking it or with Unzip Swift Job, again asks where to save the job and what to call it. Answering No when asked to overwrite an existing job cancels the import, as in PlanSwift 11.
    • The Looking for earlier PlanSwift installations window now stays in front, and its X, Esc and Cancel stop the search.
    • Copying, moving, deleting and exporting jobs, and moving your data folder, no longer follow Windows folder shortcuts (junctions) into other folders. Building a plugin package is covered too.
  • Takeoff

    • Linear and area takeoff remember Box or Point to Point mode, as in PlanSwift 11.
    • Pressing N when nothing is recording no longer starts a recording unless an item is selected on the canvas.
    • Deleting a takeoff item from the Pages panel once again offers to delete items that have no measurements left.
    • The Pages panel keeps its place after you delete a takeoff item instead of jumping to the top.
    • The Grid tool spaces its lines correctly on pages whose horizontal and vertical scales differ.

Keyboard hotkeys work, faster templates and Continue With window, numerous bug fixes - v.12.0.14.892 (Released 11/06/2026)

This update fixes your keyboard shortcuts, the Insert Property window opens in a fraction of a second on large template libraries, and several crashes and measuring problems are fixed..

Changes/Improvements

  • Insert Property opens much faster - On a large template library the Insert Property window used to take almost a minute to appear. It now loads one level at a time as you open folders. The same change speeds up the Continue With window.

  • Find box moved into the Properties title bar - In an item's Properties window, the Find box now sits in the title bar, next to the close button. It shows on the Advanced view, which is the only view it searches. The window now draws its own title bar and close button. You can still drag it, resize it and close it as before.
  • Verify Points turns off while Freehand is on - Verify Points has never asked for a length while Freehand is on, but nothing told you. Now, when you turn Freehand on, Verify Points switches off and is greyed out on the status bar and in Settings. When you turn Freehand off, Verify Points comes back enabled, set the way you had it.

Notes from the Developer

  • Searching a very large template library is still slow on the first letter you type (about 15 seconds for 2,300 templates). After that, searching is instant.
  • Some hotkeys are not wired yet: Quick Search (Space), F2 and Insert in the side panels, the Templates module's keys, Ctrl+P and Delete in Reports, and hotkeys in a floating canvas window or an undocked Estimating window.
  • Pressing New Section (N) with the canvas selected and nothing recording can start a recording on the selected item. Rebind the key in Settings if you press it by accident.

Fixes

  • Keyboard hotkeys work - Most of the hotkeys in Settings had no effect. They do now, and a key you change in Settings > Keyboard Hotkeys takes effect straight away.

    • On the canvas: zoom in and out, scroll, zoom to fit, zoom box (F10), next and previous page (PgDn / PgUp), back and forward, snap, ortho, create bookmark and continue with.

    • Tools: new area, linear, segment, count and note, and New Section (N by default).

    • Window: open a new image tab (Ctrl+T) and switch between the image and Estimating (F12).

    • In the Estimating grid: copy and paste (Ctrl+C / Ctrl+V), new item (Insert), new sub-item (Shift+Insert), new folder (Ctrl+F), properties (F2) and move with Ctrl+arrow keys.

    • Each key is listed in Settings with its current setting. A hotkey for a tool your licence does not include still does nothing, the same as the ribbon button.

  • PEG and PNG pages no longer say "This page has no DPI" - PlanSwift now reads the resolution stored in JPEG and PNG files, so Auto Scale and the scale presets work on them.

  • Check the scale on images with no stored resolution. If a file has none, PlanSwift assumes 96 DPI and does not tell you. Scans and screenshots often have none, so confirm a measurement against a known dimension before you rely on it.

  • Deleting a page with many items no longer crashes - Deleting the page you were viewing, when it held a lot of takeoff items, could end in an access violation. We fixed the cause we found. If you still see it, please send us the page and your steps.

  • Moving an Area moves its subtracted section - When you move an Area that has a subtract section, the subtract section now moves with it. Press Esc during the move to put both back.

  • Protected template properties stay protected - Properties that a template author locked with Deny Read or Deny Write now show <Blocked> in the formula cells instead of the formula. Clicking into a protected field no longer replaces its formula, which used to make every property that depended on it show an error.

  • Dragging sheets into a folder keeps their order - Dragging a group of sheets into another folder no longer reverses them.

  • For scripts and COM automation: SelectedItem returns the item - SelectedItem now returns the item you selected: the focused row in Estimating or Templates, or the item you picked in a panel. It never returns a page; use SelectedPage for that. In PlanSwift 11 it returned the item's section in some cases. If a script depends on that, update it.


Editable Lists, Auto-Scroll and Numerous Bug Fixes - v.12.0.14.875 (Released 11/02/2026)

This update makes large jobs open about four times faster and keeps PlanSwift 12 responsive while you work on them. It also adds a Methods tab for tools like Joist and Grid, editable database lists, and panning by holding the cursor at the edge of the plan, and it fixes a number of problems reported by customers. You don't need to change any settings: install the update and keep working.

Changes/Improvements

Faster on large jobs

On jobs with thousands of takeoff items, everyday actions no longer pause.

  • Opening a large job: a job with around 24,000 takeoff items took over three minutes to open. It now opens in under a minute, about four times faster. While it loads, a status window shows which job is opening and how far along it is.
  • Starting takeoff: the first time you start recording takeoff after opening a large job could take about 30 seconds. It now starts in about a second.
  • Segment takeoff: each click used to take up to almost a second on a large job. It now responds right away, about ten times faster.
  • Dragging points and moving takeoff: letting go of a point you dragged, or of takeoff you moved, used to freeze the screen for about a second. That pause is gone.
  • After hiding or showing takeoff in the Pages panel: the next drag on the plan no longer stalls.
  • Draw Joist and Draw Rafters: drawing took up to about 30 seconds. It now takes 1 to 3 seconds.

Fixes in the Pages panel

  • Pages stay in order when you drag them into a folder. Before, dragging several pages at once into a folder could reverse their order, and dropped pages could land in the middle of the folder. They now keep their order and go to the bottom of the folder. Move Up, Down, Left and Right also keep your pages in order.
  • Undo is safe after moving, copying or deleting pages. Before, undoing one of these could leave an extra copy of a page that showed up blank after you reopened PlanSwift. Undoing a delete could also bring a page back without its plan image. Now Undo puts every page back exactly as it was, with its image, in its original place in the folder.

Tools and scripts

  • New Methods tab. When you select takeoff made with a tool such as Joist, Beam or Grid, its commands now appear on their own ribbon tab, named after the tool (for example "Joist Tool"), with an icon for each command. Before, they appeared as buttons on the plan.
  • Joist, Beam and Grid tools start from the Templates panel. Starting one of these tools from the Templates panel now runs it. Before, the new item could be deleted instead.
  • Grid Tool fixes. Deleting a grid area also deletes the grid lines and counts it created. The finished area stays visible while you pick a parallel line. Clear Grid updates the plan right away.
  • Script Editor. Code you accept in the Script Editor is now saved, whether you type it in the property or in the editor. The editor also follows your light or dark theme.
  • Inputs panel. Yes/no and slider properties show a real checkbox or slider in the docked Inputs panel.

Navigating the plan

  • Pan by holding the cursor at the edge. While you record takeoff, drag, or pick a point, holding the cursor at an edge of the plan scrolls the page in that direction, as in PlanSwift 11. The corners scroll diagonally, and the edge turns red when you reach the end of the page. Set the delay in Settings.
  • Zoom Speed works. The Zoom Speed setting now controls how far the mouse wheel, Zoom In and Out, the Overview and the magnifier zoom with each step.

Lists

  • Database lists can be edited. You can now change values directly in a database list in the Lists grid. Lists that combine data from several tables stay read-only, and say so.
  • Lists remember their layout. Column order, widths, sorting, filters and totals are saved with the list.
  • Totals and filters. Right-click the column headers or the footer to add totals such as Sum, or to filter. Columns size to fit their contents.

Bringing work over from PlanSwift 11

  • Reports come across too. Import Jobs and Templates can now bring over your saved PlanSwift 11 reports.
  • Importing no longer freezes PlanSwift. The import runs in the background with a progress bar, and Cancel works even while one large job is copying.
  • Undo of an import works. Pressing Undo after an import removes the imported folder again.

Signing in and out

  • Clearer sign-in errors. A wrong password now shows "email and password combination is incorrect", as in PlanSwift 11, instead of a confusing "Customer Number not found".
  • Signing out no longer fails for some accounts. A sign-out could fail with an error when the account had no customer details on the computer; it now completes.

Other improvements

  • Export To Excel Template fills every item. If groups are collapsed, PlanSwift now asks to expand them first, so all items reach the template's columns.
  • Installing add-ons shows its progress. The add-on import wizard now tells you each step as it installs.
  • Add-ons and scripts that connect to PlanSwift work like PlanSwift 11. Add-ons can connect more than once, receive PlanSwift's notifications again, and use the commands PlanSwift 11 offered. Developers can open working examples of every command from Settings > Advanced > COM Developer Examples.
  • Closing PlanSwift is clean. An occasional error message that appeared as PlanSwift closed is gone.
  • A refreshed loading window. The window shown while a job opens has a cleaner look and matches your light or dark theme.
  • Help for display issues. Help > About > Copy diagnostics now includes each monitor's display scaling, which helps support solve problems on mixed-resolution setups.

Notes from the Developer

This update stops new blank pages from appearing. It does not remove blank copies of pages that an earlier version already left in a job, because PlanSwift can't safely tell which copy you want to keep. If a page shows nothing when you select it, contact support before deleting anything: the blank copy and the good one are linked, and deleting the wrong one could remove the plan image.


COM update - v.12.0.14.833 (Released 10/28/2028)

This update adds COM support.

PlanSwift 12's COM interface now behaves like PlanSwift 11's, and the install includes a reference app that documents and runs every COM call. Open it from File > Settings > Advanced > COM Developer Examples.... It needs the Microsoft .NET 9 Desktop Runtime (x64); PlanSwift offers the download page if it is missing.

Switching a PlanSwift 11 integration over

  1. Register PlanSwift 12 for COM once: run planswiftNext.exe /regserver from %LOCALAPPDATA%\Programs\PlanSwift12. No administrator rights are needed. A later update will do this during install.
  2. Change the ProgID from PlanSwift9.PlanSwift to PlanSwift.PlanSwift12. The methods, properties and events keep their PlanSwift 11 names.
  3. Build or run the client as 64-bit. PlanSwift 12 is a 64-bit program, and a 32-bit client cannot find it.
  4. Sign in to PlanSwift 12 before the client connects. Every call is refused while PlanSwift is signed out.

PlanSwift 11 and 12 can run side by side. Each ProgID reaches only its own program, and each program's events reach only its own clients.

Now the same as PlanSwift 11

  • BeginUpdate / EndUpdate hold the tree and the panels and apply all changes at EndUpdate, so bulk writes are much faster.
  • BeginFormulaUpdate / EndFormulaUpdate hold formula recalculation until EndFormulaUpdate.
  • Writes between NewChangeGroup and PostChanges undo as one step.
  • All 16 events (OnItemChanged, OnNewItem, OnJobOpened and the rest) are raised again.
  • OpenJobEx and NewJobEx show the Open Job and New Job windows. SaveScreenShot saves the visible part of the page.
  • CurrentVersion, Edition, IsLoaded, IsJobOpen and Handle return real values.

The app's Migrating from PlanSwift 11 and Key changes pages list every difference, with a C# example for each call.


Editable Lists, Auto-Scroll and Numerous Bug Fixes - v.12.0.14.830 (Released 10/28/2026)

This update adds editable database lists, PlanSwift 11's auto-scroll, and an import that no longer freezes, plus fixes for the bugs found in 12.0.14.800.

What’s New

  • Editable database lists - Open a database list (an Access table or an ADO query) in Lists and add, edit and delete its rows. Changes are saved to the database at once. Right-click the footer for Sum, Count, Min, Max or Average; the grid is fitted to its data and remembers its column order, widths, sort and filter.
  • Auto-scroll (pan on hover) - While you record or drag, hold the cursor in a canvas edge band or corner and the page pans after the Hover Delay. Switch it on from the canvas right-click menu or the Auto Scroll box in the status bar; Settings has Hover Pan, Delay, Pan Speed, Transparency and Disable Hovering.
  • Import without freezing - Import Jobs and Templates shows progress and a Cancel button and stays responsive. PlanSwift 12 can now import your PlanSwift 11 Reports as well.
  • Display diagnostics - Help > About > Copy diagnostics now includes each monitor's scale and the last window DPI changes, to help us track the text-shrinks-between-monitors report.

Changes/Improvements

N/A

Fixes

  • The Script Editor ignored the theme - it follows the dark and light themes, including its ribbon and code colors
  • Accept in the Script Editor did not save - the new script is saved; text typed straight into the Script cell saves too
  • Checkbox properties in the Inputs panel showed only True or False - they show a real checkbox you can tick, unless the property is locked
  • Export To Excel Template exported only the group captions - it asks whether to expand collapsed groups first (with a Do not ask again box)
  • The Zoom Speed slider did nothing - it sets how far each wheel notch, Zoom In/Out and the magnifier zoom
  • A wrong password said "Customer Number not found" - it says the email and password combination is incorrect
  • Plugin lists and report filters seemed to appear minutes after installing a package - a package is saved as soon as the install says it is complete, with progress shown
  • Hover Delay, Max Instances, and Full-screen cursor width were reset when Settings opened - they keep the value you set
  • A job or page folder could be removed while still in use - removal never deletes a folder another object owns; New Job's temporary folders are never saved

Notes from the Developer:

  • Zoom is bigger per notch. The default is now PlanSwift 11's 1.4x per wheel notch (it was a fixed 1.15x). Settings > Zoom Speed goes from 1.1x to 3x.
  • Database list edits cannot be undone. Undo does not cover them; a warning appears before your first change to each list. Turn editing off for a list with its Read Only property.
  • Lists only run a single SELECT. A list whose SQL is anything else (an INSERT, DELETE, a make-table query) is not run and says so. A query that cannot be edited, such as a COUNT or a join that Access refuses, shows read-only.
  • Lists from an MDB file keep their column layout for the session only, as in PlanSwift 11.
  • The Hover Zoom Speed setting is gone; PlanSwift 11 never used it.

Updated Ribbon Bars and fixes for Grid, Joist, and Beam tools - v.12.0.14.826 (Released 10/26/2026)

What’s New

  • Tool methods on a ribbon tab. Select a section that belongs to a scripted tool (Grid Tool, Joist Tool, Beam Tool) and a tab named for the tool appears at the right of the ribbon, with a group called "Grid Tool Methods" (or "Joist Tool Methods") holding a button for each method. PlanSwift switches to it when you select the section and takes you back to the tab you were on when you click empty sheet. These buttons used to sit in the top-left corner of the sheet and cover the drawing. The right-click menu still offers the same methods.
  • Method icons. In a method's Edit Property window, Script Options now has an Icon row. Choose an image (it is scaled to 32 x 32) and it shows on that method's ribbon button; Clear removes it. The Draw / Clear Grid, Draw / Clear / Split Joist/Rafters, Regenerate Totals, Add Double Joist and Beam Generate Totals methods come with icons.

Fixes

Grid Tool

  • The drawn area no longer disappears while you choose the parallel line (Select Parallel Side).
  • Deleting a Grid area now also deletes its grid lines and count points, whether you delete it from the canvas, the Pages panel or the Takeoff Summary. Undo (Ctrl+Z) brings all of it back in one step.
  • Clear Grid clears the sheet at once. Before, the grid stayed on screen until you clicked the canvas.

Joist Tool, Beam Tool and Grid Tool

  • Creating one of these items from a template no longer deletes the new item straight away. Its Properties window opens as it should.
  • Draw Joist/Rafters is much faster. On a sample area of 22 joists it went from about 30 seconds to 1 to 3 seconds. Clear Joist/Rafters is faster too (from about 12 seconds to 3 to 8 seconds). The joists, labels and totals are the same as before.

Notes

  • Icons on an existing install: PlanSwift keeps the tool definitions you already have, so the new method icons show on a fresh install or after the tool's type is re-imported. A method you give an icon yourself shows it right away.
  • Keyboard stays on the canvas. After you click a method button, keys such as Delete and Esc still act on the section you selected.

Export to Excel Template, Search Results in Tabs, Various Bug Fixes - v.12.0.14.808 (Released 10/24/2026)

This update adds Export To Excel Template to Reports, puts the search results into tabs, and fixes the reported problems with scaling, jobs, properties, templates and search. Thank you to everyone who sent feedback.

New Features

  • Export To Excel Template (Reports). Choose one of your own Excel templates and PlanSwift fills it with the report.
    • Put <begin data> in column A where the rows should start, and optionally <end data> on the last row you want used. Your formatting, formulas and other sheets are kept. If the data does not fit, it continues on the next sheet (which needs its own <begin data>). Excel must be installed.
  • Search results in tabs. The Search Results panel now has a tab for each filter (Pages, Templates, Items, Commands) with its own result list and hit count.
  • Search Results starts minimized on the right. In the default layout the panel sits on the right-hand side strip until you open it.
  • Ribbon search box. It now has a Clear button and shows "Search" when empty. The term stays after you press Enter, and Commands is no longer in the filter list. Changing the filter clears the current search.
  • Pinned jobs stay pinned. A job you pin in the PlanSwift menu under Recent keeps its pin when you open other jobs and after you restart. Pinned jobs are never pushed off the list.

Changes

  • Legacy themes have been removed. The legacy themes were not DPI-aware and clipped buttons on high-resolution and multi-monitor screens. The Theme list now includes: Auto (Windows), Modern Light, and Modern Dark. If you had a Legacy theme selected, PlanSwift switches you to Auto (Windows).
  • The Properties window is wider. It opens wide enough so that the whole toolbar above the Advanced view (including the Find box and the Show list) is visible.
  • Job Properties is greyed out when no job is open (PlanSwift menu).

Fixes

Jobs and the Recent list

  • With Auto open last job turned off, PlanSwift no longer reopens the last job when it starts.
  • Copying a job to its own storage location (Local to Local) works again: Copy To and Move To now list every location, and the copy is named "<name> - Copy".
  • The New Job and Add Pages wizard remembers your Convert options (DPI, colour depth, page naming, index text), your Blank Page entries and the last image folder.

Scale and takeoff

  • Set Page Scale: Apply to all pages now scales every page, including pages you have not opened yet, and a manual scale replaces an Auto or Boost scale on both axes.
  • Count items sized in feet (for example a 3' x 5' symbol) are drawn at their real size on a scaled sheet instead of as dots.
  • Thick line items (Linear and Segment) no longer show a white gap or stray corner pieces where the line turns.
  • Starting and stopping Record without clicking a point no longer leaves an empty "0.0" row in the Pages panel.

Properties and templates

  • In Properties (Advanced), groups you collapsed stay collapsed when you open Edit properties or drag a variable into a formula.
  • The formula editor's OK now updates the property's formula, and the file, folder and connection-string pickers keep what you chose.
  • Templates you hide in the Templates module no longer appear in the template lists on the Home, Estimating and Templates tabs, and stay hidden after a restart.
  • In Estimating, you can drag a part onto an assembly or takeoff item (the middle of its row) to make it a child, not only onto folders.

Search

  • Page text search highlights every hit on the current page again, including on scanned TIFF sheets, and picking a result zooms to it even when Full Page is off.

Notes

  • Moving one segment to another item: in Reassign Takeoff, tick Only Selected Sections. With it ticked only the sections you selected move; without it the whole takeoff item moves.
  • Export To Excel Template opens Excel with your template visible. A workbook with macros gets Excel's normal security prompt. Text that starts with =, +, - or @ is written as plain text so Excel does not run it as a formula.

v12.0.14.803 (Released 20261022)

This update makes page scaling more reliable, draws thick lines and Count symbols correctly, and makes job handling and the side panels behave the way you expect.

Scale and drawing

  • Apply scale to all pages now applies everywhere. A manual scale replaces the scale on both axes of every page, and the Auto tab now scales pages you have not opened yet. Measurements are consistent from page to page.
  • Count symbols are drawn at their real size. A symbol sized in feet, for example 5 ft by 3 ft, is converted through the page scale and resizes when you change the page scale.
  • Thick lines no longer show gaps. Thick Linear and Segment lines now have solid corners at 90 degrees and at sharper angles, including lines drawn on the left or right side.

New Job and Add Pages

  • The wizard remembers your choices. DPI, color depth, Convert PDF, page-name settings and the Index text option are kept for the next time you open New Job or Add Pages. So are the Blank Page width, height, DPI and scale, and the last image folder. They survive restarting PlanSwift.

Open Job and job properties

  • Copy To now includes Local. Every storage location shows its icon, and a new Add Location icon sits beside them.
  • Copying a job into the location it is already in names the copy "<job name> - Copy". If that name is taken, the next copy is "- Copy 2", and so on.
  • Move To and Copy To are drop-down buttons. Delete is now in the Utility group, and a separator divides Properties from the folder tools.
  • Moving a job to a location that already holds a different job in the same folder no longer fails. PlanSwift gives the job a free name, such as "Test (2)".
  • New jobs get the standard job properties. Name can be edited, Folder is locked, and Description (text) and Notes (multi-line) appear in the Item group. Jobs you created earlier keep their current properties.

Side panels and recording

  • Templates, Takeoff Summary and Pages remember the folders you collapsed. They no longer expand again when you click between panels, select an item or start a takeoff. While you search, everything opens so you can see the matches, and your collapsed folders return when you clear the search.
  • The green record button in the Pages panel now starts recording. Recording starts on the page you are viewing instead of jumping to another page.
  • The record buttons in Pages, Takeoff Summary and Templates update as soon as recording starts or stops, without clicking the panel.

 

Build 12.0.14.800 fixes seven tester-reported problems since 12.0.14.791: Takeoff Boost quantities and drawing, Record from the Takeoff Summary, the Folder field, paste speed on large jobs, Starter Packs, and page notes.

Fixes

Takeoff Boost and Auto Scale

  • Boost items read 0 after Auto Scale. Auto Scale set the page's scale but not its units (feet or metres), so new Boost items had no unit and showed a quantity of 0. Auto Scale now writes the units, as the ribbon's scale presets always did.
  • Auto Takeoff results were not drawn until a click. The Pages panel and the Takeoff Summary showed the new items, but the plan stayed blank until you clicked it. The plan now redraws as soon as the run finishes.

Takeoff and Takeoff tools

  • Record did nothing after a Takeoff Summary pick. The ribbon's Digitizer Record button (and its hotkey) only looked at what was selected on the plan. It now also uses the item picked in the Takeoff Summary, as PlanSwift 11 does.
  • No Folder field when creating a takeoff item. The New Takeoff Item dialog is back to PlanSwift 11's Folder field. It lists the folders under Takeoff, accepts a new path such as Walls\Interior, and remembers the last folder you used in the job.
  • Pasting into a new item was very slow on large jobs.
  • Paste into a new item is now also a single Undo step.
  • Starter Pack parts showed a locked-content warning. An active PlanSwift subscription now opens the 11 PlanSwift Starter Packs. Third-party compiled content stays locked.

Other Changes

  • Essential and Core Subscriptions can install packs. The pack's templates, lists, and layouts install.
  • Signed out or expired: parts stay locked, and the notice now says a PlanSwift subscription is needed.
  • Fixed alongside: double-clicking a package while PlanSwift is running no longer opens the import wizard twice. The Templates panel no longer crashes when you switch its tab back and forth.
  • The Notes panel's columns are now Name and Page (the page each note is on), as in PlanSwift 11. Before, the second column repeated the note's text. The note-text box below the list stays.
  • Edits not showing: changing a note's text or text size in Properties now updates the note on the plan at once. The same fix covers Properties edits from the Pages and Parts panels.

 

This update provides performance improvements and support for Starter Packs.

Changes/Improvements

  • Performance Improvements for large scale jobs, and batch operations like paste
  • Plugin Starter Packs are now subscription based

Initial Beta Release v.12.0.14.755 (Released 20261015)

 

New Features

64-Bit Processing

  • PlanSwift 12 is built on 64-bit architecture which provides these benefits:
    • Faster performance, especially on large Jobs
    • Runs Takeoff BOOST™’s AI-Tools while allowing user to continue working on the Job
    • Reduces or eliminates crashes due to system or resource issues

Text Searching

  • You can search across plans, assemblies, items, whatever, and the results are shown in a separate panel that makes navigating to where the text occurs a snap (literally, a click).

Takeoff BOOST™ is built-in

  • All of Takeoff BOOST™'s AI tools - Auto Takeoff, Auto Count, Auto Scale, Auto Bookmark, and Reassign Takeoff - are installed with PlanSwift 12, with no separate system-tray icon, no separate download or updates

Changes

Updated, Modern User Interface

  • Brings the tools you use most to the Home Tab so they are easier to get to
  • Customize the layout however you like
  • Use light, dark, or system mode

Smoother Installation

  • No need for Administrator access to install PlanSwift 12 (each user on a machine will install PlanSwift individually).
    • If you are already using PlanSwift 10 or 11, PlanSwift 12 installs along side, it does not upgrade those versions. Once installed, just use the “Import Jobs and Templates” option in the PlanSwift (icon) menu to locate and import your older jobs.
  • Automated updates - just click a button and PlanSwift checks for and installs updates automatically.

Handles High Quality Images and Native PDFs Better

  • Native higher resolution display increases Takeoff Boost’s accuracy
  • Don’t bother converting your PDFs to TIFs - they’ll work fine in PlanSwift 12
  • A larger scratch disk lets PlanSwift work with bigger, more complex jobs

Native PDFs also allow Takeoff BOOST to perform better.

High DPI/Hi-Res Monitor Support

  • Now PlanSwift takes advantage of your high resolution monitors (4K) better.

Other Changes

  • Signing in has moved. Sign in to PlanSwift 12 with your PlanSwift account from the title-bar Account Settings menu (top right-hand corner) — the separate "PlanSwift" ribbon tab from earlier builds is gone. If you are not signed in, you can still create, view, and print jobs; signing in unlocks full functionality, including takeoff, estimating, and Takeoff BOOST’s AI-powered tools.
  • Manual activation has been retired. For security, PlanSwift 12 no longer supports entering an activation code while offline, you must sign in online to activate.
  • Emailing a job is changing. PlanSwift 12 does not include the Email Project button for this beta. We're building a better way to share a job by email and will have more to share as it gets closer. For now, export the job and manually e-mail/share via a cloud drive.

Fixes

  • The Zooming issue introduced in PlanSwift 11 - that caused some users to experience random zooming when viewing a Page - has been fixed.

Related Articles

This topic has been closed for replies.